Bluetooth and USB scanners
Bluetooth and USB scanners (and ring scanners) usually work as a keyboard: they "type" the barcode they read into the device. The app supports them in Text Input mode.
Setup
- Connect the scanner to the phone (Bluetooth pairing or a USB/OTG cable), following the scanner maker's instructions.
- On the scanner, set the output to keyboard (HID / keyboard / keystroke) and have it send an Enter key after every barcode (CR suffix). On most scanners this is set by scanning the setup codes from their manual.
- In the app: Settings → Scanner → Scanner Mode → Text Input.
- On a count list or a record, just press the trigger — the app picks up the barcode by itself; you don't need to tap an input field.
The app accepts the barcode when the Enter arrives. If the scanner doesn't send Enter, the barcode isn't processed.
Rugged devices in keyboard mode
The built-in scanner of a rugged device can also work as a keyboard (keystroke), so Text Input works there too:
- CipherLab: ReaderConfig → Keyboard Emulation → Input Method (or Key Event), and leave Auto Enter at Decoded data + Enter char.
- Chainway (Keyboardemulator): Process mode → Keyboard input, with Enter as the End mark.
Warning
On Zebra devices, keyboard mode registers the scanner as a hardware keyboard, which can hide the on-screen keyboard and draw a frame around the field. For Zebra devices, choose DataWedge.
If scanning doesn't work as expected, see Troubleshooting.

